Elmer’s Carpenters Wood Glue Review

Although more famous for their school glues, Elmer’s E7310 Carpenter’s Wood Glue Max is by far the best glue that you can find. Its adhesive power and durability have been unparalleled since its inception in 1947. We bring you this Elmer’s Carpenters Wood Glue review to help you get a better idea.

Overview of Elmer’s Carpenters Wood Glue

For a carpenter, the glue they use for construction is the last line of defense. The bond has to be solid and effective. If they’re weak, your project will end up in pieces, literally. Elmer’s E7310 Carpenter’s Wood Glue Max is a glue that can hold on to the wooden parts as if they were magnets and the parts were metal.

This adhesive is built for industrial usage but this doesn’t stop it from being used in casual DIY projects. In fact, the waterproof nature and paint-like consistency make the glue easy to use. You can take some on a brush and use it on the surface too.

While using it, don’t worry about the weather. The glue is perfect for indoor and outdoor use. Despite that, the adhesive isn’t suitable for all materials. You can only use it on a wooden surface. Well, it’s a given considering the product’s name.


Each 16-ounce bottle of E7310 is filled with an adhesive that will surpass your expectations. The features it has are worthy of becoming top one in the market.

For proper industrial use, the glue has one of the least curing times. Unlike other adhesives, which require about 24 hours of clamping, this one needs only half an hour. This swiftness isn’t at the expense of the glue’s performance. The glue is designed to be used in the shortest amount of time.

But if you’re still doubtful, then all that worry is in vain. Elmer’s Wood Glue works like most other PVA glues. The bond formed by the glue is, in fact, stronger than the wood surrounding it.

Now, most other strong adhesives are toxic, but that’s not the case here. The glue is not only free of any toxin but also forms zero fumes. This ensures a safe work environment for you.


  • Minimal clamping duration
  • Safe and non-toxic glue
  • Can be sanded after drying
  • Zero fume development
  • Perfect for any weather condition


  • Can only be used for wood
  • No option to dilute the glue

How to Use Elmer’s Carpenters Glue

Elmer’s has some of the simplest, easy-to-use glue on the market. Their glue bottles are designed to assist in your work, but it does need to be appropriately applied. If not done so, the glue won’t stick the way it was supposed to.

Here are the steps on how you can use it flawlessly.

Prepare the Surface

Before applying the glue, you need to ready the surface that needs to be glued. Glue has a hard time sticking to a wet surface. Make sure the wooden surface is dry and smooth.

In case of an uneven surface, the glue won’t spread properly, which will loosen the grip. To make the surface smooth, it’s recommended to sand the wood.

After sanding, wipe the wooden surface with a dry cloth. This will remove any loose bits formed during sanding.

Ready the Glue

Once the surface is ready, take the bottle and shake it well. This allows the glue to become homogeneous.

After vigorous shaking, take the cap off and form a hole in the nozzle if this is the first time you’re using it. Most of the time, the nozzle is already punctured but if it isn’t, use to cap to form the hole.

Coat the Wood

After preparing both the wood and the glue, apply the glue on the wooden surface. Now you can apply the glue on both or one wooden surface. That’s up to you. But according to many professional woodworkers, it’s better to use glue on both sides.

The argument which they show in favor is a valid one. According to them, when applied on both surfaces, the glue enters the wooden cervices with ease. This allows for a better and stronger hold.

Clamp and Cure

Whether you applied the glue on both or a single surface, you’ll have to clamp them tightly after application. This allows the glue and wood to know each other. This process is known as Curing.

The clamps have to be tight so that the wood doesn’t budge. This is the most crucial step for solid bonding.

Wipe Off the Excess

When you clamp the wood surfaces, the excess glue comes out the side. This means the amount of glue you used has covered the whole wooden surface. If this excess glue dries up, you’ll have to sand the wood into shape again.

To avoid that hassle, wipe off the edge. It’s recommended to use a wooden card instead of a cloth to wipe off the excess.

Cap It

After use, the glue bottle has to be capped off and stored in a shaded place.

If it’s kept near fire or under direct sunlight, you won’t be able to use the glue again. The heat weakens its effectiveness.

Frequently Asked Question (FAQs)

1. Does Elmer’s Glue Work on Plastic?

There are some Elmer’s glues that work on plastic. Such glue has a cure time of about twelve hours. Sadly,  the Elmer’s E7310 isn’t one of those. The only material the adhesive is suitable for is wooden surfaces.

2. What Are the Ingredients of Elmer’s Glue?

The primary ingredients for all Elmer’s glue are the same. It’s an aqueous emulsion of Propylene glycol, Polyvinyl acetate, and Polyvinyl alcohol. All these are the same ingredients for any other mainstream PVA glue.

3. Does Elmer’s Carpenter’s Wood Glue Dry Clear?

Elmer’s Carpenter’s Wood Glue has a milky white color to it in the liquid state, but when it dries up, the color changes. It becomes almost transparent. If the bottle is an old one, the color will become darker instead of clearing.

4. Can I Use Elmer’s Glue Instead of Wood Glue?

What sets wood glue apart from other glue is its water content. They have a lower water content that lets them set perfectly. Elmer’s glue isn’t runny and has a similar water content to wood glue to be used as a substitute.

5. Is Elmer’s Glue as Good as Wood Glue?

Yes, they’re as good as any regular wood glue. This is due to the lower water content and the perfect PVA ratio.

Bottom Line

For artisans, the glue they use determines the durability of their work. No wonder they’ll use the best adhesive. That’s why most of them chose Elmer’s E7310. With its waterproof ability and easy-to-use feature, you can use it for all wooden projects.

After going through this Elmer’s Carpenters Wood Glue review, you should be able to understand its specialty.

Leave a Comment

Your email address will not be published. Required fields are marked *

Show Buttons
Hide Buttons
Scroll to Top